Secunorm Mizar, SN500, SN300 mountable blades - Standard - 10pcs

Secunorm Mizar, SN500 and SN300 mountable blades - Standard (10 pieces)

Trapezoid mountable blades are designed for the Secunorm Mizar, Secunorm 500 and Secunorm 300, and are 2-cutting edge blades. The blades are packaged in a dispenser and are sold per 10 pieces (so if you choose "Qty 1" at the top of this page, you will receive 10 blades).

Tool-less blade change. How to do it?

Secunorm Mizar:

1. Move the 3-in-1 safety lock
2. Swing out the lever
3. Replace the blade, store the lever and continue your work!
   

Secunorm 500:

1. Press once to remove the blade carrier with its securely held blade
2. Lift the blade cover; it will stay in the required position
3. The blade is then safely removed using the bladeless edge
   

Secunorm 300:

1. Press the blade change button
2. Remove the plastic insert with the blade
3. Replace the blade
4. Put the plastic element back in place
   

Instructions for use: store used blades securely in the Martor wall mount bracket container.